inner banner
Aravali Institute of Technical Studies (AITS) Admission open in 2017-18 , Udaipur
About Us:

 

Aravali Institute of Technical Studies, established in 2008, is an Institution that is committed to provide Best Teaching, Training ,Placements and Infrastructure for Technical education viz. B.Tech. , M.Tech., MCA & Diploma (Engineering). It is approved by AICTE, Govt. of India and Affiliated to Rajasthan Technical University, Kota (Raj.). The Institution has Excellent imposing buildings with spacious Class Rooms, Highly Qualified and Experienced Faculties, Laboratories with the State of the Art equipment and other Excellent Infrastructure Facility. The campus is located amidst the Aravali hills in a pleasant enviourments ideally suited for Teaching and Learning Process. It is located at a distance of 11 km from Udaipur city and opposite to Umarda Railway Station, udaipur.

 

Our Mission: To train and equip young energies with national as well as global prospective, sharp analytical insight and strive towards hardwork and dedication.

 

Our Vision: “ Tomorrow will take care itself, if one does an excellent job today”. To nurture and develop talent, blended with values and technology to strengthen the technical man power of the nation.

Course Offered

 

UNDER GRADUATE PROGRAMMES

B.Tech in:

  • Computer Engineering
  • Electronics & Communication Engineering
  • Civil Engineering
  • Electrical Engineering
  • Electrical and Electronics Engineering
  • Mechanical Engineering

  B. Sc. Nursing

 

POST GRADUATE PROGRAMMES

M.Tech in:

  • Production Engineering
  • Thermal Engineering
  • Digital Communication
  • Software Engineering
  • Power Electronics & Electric Drives

  MCA

 

DIPLOMA PROGRAMMES

Diploma in Engg:

  • Electrical Engineering
  • Mechanical Engineering

 

  •   Civil Engineering
  •   Computer Engineering

 

Eligibility

 

For B.Tech:

  • 1st Year: Passed 10+2 Examination with Physics & Mathematics as compulsory subject along with one of the Chemistry / Bio-Technology / Biology / Computer. Obtained at least 45% marks (40% in case of candidate belonging to reserved category) in the above subjects taken together.
  • 2nd year (LEEP): Passed Diploma examination from an AICTE approved institution with at least 45% marks (40% in case of reserved category candidate) in appropriate branch of Engineering/Technology or B Sc. Degree with Mathematics from UGC defined university with 45% marks.

For B.Sc (Nursing):

  • 12th Class with Science Bio from any recognized Board.
  • Minimum 45% marks (5% relaxation for SC/ST)

For M.Tech: Admission to the Master of Technology (M.Tech.) Course shall be open to candidates possessing not less than 55% (6.25 CGPA on 10 points scale and equivalent) and 50% (5.75 CGPA on 10 points scale and equivalent) in case of SC/ST in qualifying examinations under following categories :

  • The candidates who have passed B.E. / B.Tech. Examinations (in related branch of engineering) of RTU or any other recognized University / Institution or any other examinations recognized as equivalent thereto by competent authority.
  • Candidates with qualifications obtained through examinations conducted by professional societies recognized by UGC/AIU/UPSC/AICTE (e.g. AMIE by Institute of Engineers (India); AMICE by Institute of Civil Engineers (India); IEE) as equivalent to B.E./B.Tech.
  • Candidates having M.Sc., MCA and are seeking admission to certain M.Tech. programmes should posses valid and qualified GATE score of the relevant branch.

The equivalency of any degree for admission to any programme will be decided by University. The eligibIlity criteria given in the following table are minimum and mere possessing the same does not qualify the eligibility for admissions. University may prescribe any other requirements over and above these conditions. If a recognized university has an approved conversion formula of CGPA into percentage then it will be applicable on producing the certificate of conversion from the concerned University.

 

For MCA:

  • The candidates must possess (10+2) at school level with mathematics and Graduation (3 years duration) in any subject from any recognized University.
  • Graduation (10+2+3 years duration) in any subject with mathematics as one subject from any recognized University, with at least 50% marks in aggregate (45% in case of SC/ST and Non creamy layer OBC/ SBC candidates), without any approximation in the Graduate Examination.
  • Candidates with BCA, B.Sc.(IT) & B.Sc.(Comp. Science) degrees are eligible for the requirements of mathematics.

For Diploma in Engg

 

1st year: 10th Class from any recognized Board.

 

2nd year:

  • 12th Science Vocational/ Technical.
  • 12th class pass from any recognized Board with Physics Chemistry & Maths as Compulsory Subject.
  • I.T.I. in relevant Branch.

Facilities

 

Library: Library is the soul of our educational institution. The Library has been an integral part of academic endeavor in college. Keeping in view intensive and extensive use, the library is being constantly enriched by the acquisition of latest books and journals keeping in pace with changing times, to further the advancement of the University's academic activities. The College has well stocked library to maintain a high standard of academic excellence.

 

Hostel: It has been a long tradition in education that students seeking knowledge leave their parents and start living at another place so as to attain knowledge and wisdom and gradually become a responsible citizen of the country. Quite often, in this process, they feel sad, lonely and home sickness as well. Though these things are not new, it needs to be addressed again and again till the student develops some familiarity with the new surroundings and accepts the unavoidable change. The college has given a deep thought in this regard and developed the modern aesthetically designed hostels in its campus that gives the resident students a feeling of comfort and ambience of home. Needless to say that the College has separate girls and boys hostel facility that meets the moral requirements of the society as well.

 

Separate wardens for each hostel are appointed that take care of the students in the best possible way. They also have the responsibility of providing counseling to the new students during off college hours. No doubt, they do their duties with utmost zeal and sincerity. The Hostels have excellent standard of living with round-the clock availability of basic facility. The hostel rooms are spacious, well ventilated and well organized. The hostels have outdoor facilities for badminton, volleyball, and indoor facilities for table tennis, carom, chess, T.V., Gym etc.

 

The Hostel Mess is provided with water purifier, water coolers and other necessary facilities. Special care is taken in preparation of food under hygienic conditions in the Hostel Mess. Ragging in any form is prohibited inside or outside the campus and any student caught indulged in such an activity would be severely punished. All Hostels are Wi-Fi Enabled. The students from all over the India viz. Jammu & Kashmir, Bihar, Gujrat and other also live with harmony.

 

Cafeteria: College life is a huge transition to most of the new incoming students. Having to give up all the comforts from home, to live in an apartment is already hard enough, but one of the biggest changes in this new lifestyle these people are entering is in the food. The Cafeteria in the campus not only provides a vibrant atmosphere and unleaded fuel for the day but also is an effective way to put forth a new method called the "Cafeteria approach" where in there is a scope for informal interaction between students and faculty occurs. The culture also promotes learning at ease. We at Aravali try our best to provide quality cafeteria services.

 

Placement

 

Training and Placement Cell in AITS has been playing a significant role and is now one of the key departments of our institution. As there are many more Engineering Colleges coming up, the competition for employment is increasing every day and providing an opportunity for placement has become a challenge. The Training and Placement cell has come in its inception from quite a long time now and is performing activities like arranging implant training for students and inviting various organizations for campus recruitment.

 

The Training and Placement cell is all set to equip students with all the important prerequisites of selection process viz. group discussions, psychometric tests, technical interviews, resume writing etc. This Year about 32 esteemed companies have visited and selected AITS students so far for recruitments viz. Bisleri, usha power Tech, Indian Army ,westin electromech ,Vodafone Siemens ,Lipi data Systems, Pyrotech,The Oberoi, Secure Meters, Arcgate, J. K. Cements and many more. We have achieved almost 100% placement of our eligible students. It is a matter of great satisfaction at AITS as 70% of our eligible students from AITS of final year have already been placed up to April-15.

 

Placement Process

  • The training & placement department sends placement invitation letters to the companies enclosing a brief summary of the courses available at AITS.
  • The Placement Performa (PFA) is required to be filled in by the company. The completed form along with a brief company profile, job profile and details about campus recruitment drive is to be sent by the company to the Training & Placement Cell.
  • The company can visit the campus for a Pre-Placement Talk either before the selection processes or can combine it with the final recruitment.
  • On receiving information file, the training & placement office announces the requirements of the company, asking interested students to submit their resumes, which are then handed over to the company.
  • The company is required to shortlist candidates from the application pool and eligibility data file sent and send the same with short listed candidates to the Training & Placement Cell at the earliest.
  • A mutually convenient date is finalized for the selection process/ recruitment drive.
  • The company is required to furnish the final list of students preferably on the same day, or as soon as possible, after completion of the selection process.
  • The offer letters need to be sent to the Training & Placement Cell for handing over to the students. Offer acceptances (from the students) received, will be sent to the company by the Placement Office.

For More Admission Related Queries,

 

Contact Us:

Mobile: +91 9643733688
E-mail:
info@admissionsinindia.com